Rinse Free Polish Stripper
Rinse Free Polish Stripper Latest advanced technology to unlock metallised polish. Advanced soil suspending formula helps recovery. Low foam for speed use and ultimate wet pickup.

Selspeed is a modern alternative to traditional caustic based polish strippers. Use Selspeed in well ventilated areas. Whilst it is good practice to rinse the floor with a mild acidic water solution before re-polishing this is not necessary with Selspeed.

Mop Stripping: Dilute Selspeed 1:5 with water. Mop the floor liberally. Leave for 5-10 minutes. Using the mop agitate with a fresh solution and leave for a further 5 minutes. Remove slurry with a mop or wet pickup. Scrubbing machine: Dilute Selspeed 1:10 with water. Mop the floor liberally. Leave for 5-10 minutes and then scrub with a slow machine fitted with a black pad. Remove slurry with a mop or wet pickup. Spray Stripping: Dilute Selspeed 1:20 with water. Spray lightly ahead of machine fitted with a suitable pad at medium speed. NB: Do not use ‘Selspeed’ on linoleum, unsealed wood or unsealed cork floors.

Technical

Composition
An aqueous blend of Alkaline builders, sequestering agents, soil suspending agents and detergents.

Appearance Clear thin liquid
Colour Blue
Cloud Point >60
Density 1.014
pH >13.5
Fragrance slight solvent

Stability
2 years in a unopened container

Biodegradability
All surfactants contained in Selden Products meet the requirements of the EU Detergent Directive 2005 – 2004/648/EC. This requires all surfactants to break down both quickly and completely into harmless material such as CO2 and water.

Storage
Protect from freezing

Flashpoint >100